Appreciate our customers' trust，so happy to get this good order from our Poland customer.
Part Number：ISO1050DUBR
Manufacturer：Texas Instruments
Description ：IC TXRX/ISO HALF 1/1 8SOP
Category：Integrated Circuit Interface Drivers, Receivers, Transceivers
Applications：
• Industrial automation, control, sensors, and drive systems
• Building and climate control (HVAC) automation
• Security systems
• Transportation
• Medical
• Telecom
• CAN bus standards such as CANopen, DeviceNet, NMEA2000, ARINC825, ISO11783, CAN Kingdom, CANaerospace
The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2)insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.
As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12-V to 12-V common-mode range.
The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.
Part Number：LTM4630AIY#PBF
Manufacturer：Analog Devices Inc.
Description ：Non-Isolated PoL Module, Digital DC DC Converter 1 Output 0.6 ~ 5.3V 36A 4.5V - 15V Input
Category：Power Supplies - Board Mount DC DC Converters
Applications：
• Telecom and Networking Equipment
• Storage and ATCA Cards
• Industrial Equipment
The LTM®4630A is a dual 18A or single 36A output switching mode step-down DC/DC µModule® (micromodule) regulator with wider VOUT range and higher efficiency than LTM4630. Included in the package are the switching controllers, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 18V, the LTM4630A supports two outputs each with an output voltage range of 0.6V to 8V, each set by a single external resistor. Its high efficiency design delivers up to 18A continuous current for each output. Only a few input and output capacitors are needed. The LTM4630A is pin compatible with the LTM4620 and LTM4620A (dual 13A, single 26A) and the LTM4630 (dual 18A, single 36A).
The device supports frequency synchronization, multiphase operation, Burst Mode operation and output voltage tracking for supply rail sequencing and has an onboard temperature diode for device temperature monitoring. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include overvoltage and overcurrent protection. The LTM4630A is offered in 16mm × 16mm × 4.41mm LGA and 16mm × 16mm × 5.01mm BGA packages.
Part Number：BA591,115
Manufacturer：NXP USA Inc.
Description ：RF Diode Standard - Single 35V 100 mA 500 mW SOD-323
Features and benefits：
• Very small plastic SMD package
• Low diode capacitance: maximum 1.05 pF
• Low diode forward resistance: max. 0.7 Ω
• Small inductance
• AEC-Q101 qualified
Applications：
• Low loss band-switching in VHF television tuners
• Surface-mount band-switching circuits.
Part Number：IRFH7545TRPBF
Manufacturer：Infineon Technologies
Description ：N-Channel 60 V 85A (Tc) 83W (Tc) Surface Mount PQFN (5x6)
Series：StrongIRFET™
Application：
• Brushed Motor drive applications
• BLDC Motor drive applications
• Battery powered circuits
• Half-bridge and full-bridge topologies
• Synchronous rectifier applications
• Resonant mode power supplies
• OR-ing and redundant power switches
• DC/DC and AC/DC converters
• DC/AC Inverters
Benefits：
• Improved Gate, Avalanche and Dynamic dV/dt Ruggedness
• Fully Characterized Capacitance and Avalanche SOA
• Enhanced body diode dV/dt and dI/dt Capability
• Lead-Free, RoHS Compliant
Part Number：LM339DR2G
Manufacturer：onsemi
Description ：Comparator General Purpose CMOS, Open-Collector, TTL 14-SOIC
Category：Integrated Circuit Linear Comparators
Features：
• Single Supply Operation: 3.0 V to 36 V
• Split Supply Operation: ±1.5 V to ±18 V
• Low Input Bias Current: 25 nA (Typ)
• Low Input Offset Current: ±5.0 nA (Typ)
• Low Input Offset Voltage
• Input Common Mode Voltage Range to GND
• Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA
• TTL and CMOS Compatible
• ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation
• NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
Part Number：SN74LVC1G17DBVR
Manufacturer：Texas Instruments
Description ：Buffer, Non-Inverting 1 Element 1 Bit per Element Push-Pull Output SOT-23-5
Category：Integrated Circuit Logic Buffers, Drivers, Receivers, Transceivers
Applications：
• AV Receiver
• Audio Dock: Portable
• Blu-ray Player and Home Theater
• MP3 Player/Recorder
• Personal Digital Assistant (PDA)
• Power: Telecom/Server AC/DC Supply: Single Controller: Analog and Digital
• Solid State Drive (SSD): Client and Enterprise
• TV: LCD/Digital and High-Definition (HDTV)
• Tablet: Enterprise
• Video Analytics: Server
• Wireless Headset, Keyboard, and Mouse
This single Schmitt-trigger buffer is designed for 1.65-V to 5.5-V VCC operation.
The SN74LVC1G17 device contains one buffer and performs the Boolean function Y = A.
The CMOS device has high output drive while maintaining low static power dissipation over a broad Vcc operating range.
The SN74LVC1G17 is available in a variety of packages, including the ultra-small DPW package with a body size of 0.8 mm × 0.8mm.
The SN74LVC1G17 device contains one Schmitt trigger buffer and performs the Boolean function Y = A. The device functions as an independent buffer, but because of Schmitt action, it will have different input threshold levels for a positive-going (VT+) and negative-going signals.
The DPW package technology is a major breakthrough in IC packaging. Its tiny 0.64 mm square footprint saves significant board space over other package options while still retaining the traditional manufacturing friendly lead pitch of 0.5 mm.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
Part Number：SN65HVD1786DR
Manufacturer：Texas Instruments
Description ：1/1 Transceiver Half RS422, RS485 8-SOIC
Category：Integrated Circuit Interface Drivers, Receivers, Transceivers
Applications：Designed for RS-485 and RS-422 Networks
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis- wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications.
These devices combine a differential driver and a differential receiver, which operate from a single power supply. In the 'HVD1785, 'HVD1786, and 'HVD1787, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. In the 'HVD1793, the driver differential outputs and the receiver differential inputs are separate pins, to form a bus port suitable for full- duplex (four-wire bus) communication. These ports feature a wide common-mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from –40°C to 105°C.
