In addition to brand new original components, we also supply quality-assured obsolete and hard-to-find electronic components.A US customer purchased a batch of obsolete integrated circuits and sensors from us due to production needs
Order Information ：
Part Number：M93C46-WBN6P
Manufacturer：STMicroelectronics
Category ：Integrated Circuits Memory
Description ：IC EEPROM 1KBIT SPI 2MHZ 8DIP
Detailed Description：EEPROM Memory IC 1Kb (128 x 8, 64 x 16) SPI 2 MHz 8-PDIP
Features：
• Industry standard MICROWIRE™ bus
• Single supply voltage:
– 2.5 V to 5.5 V for M93Cx6-W
– 1.8 V to 5.5 V for M93Cx6-R
• Dual organization: by word (x16) or byte (x8)
• Programming instructions that work on: byte, word or entire memory
• Self-timed programming cycle with auto-erase: 5 ms
• READY/BUSY signal during programming
• 2 MHz clock rate
• Sequential read operation
• Enhanced ESD/latch-up behavior
• More than 4 million write cycles
• More than 200-year data retention
The M93C46 (1 Kbit), M93C56 (2 Kbit), M93C66 (4 Kbit), M93C76 (8 Kbit) and M93C86 (16 Kbit) are electrically erasable programmable memory (EEPROM) devices accessed through the MICROWIRE™ bus protocol. The memory array can be configured either in bytes (x8b) or in words (x16b).
The M93Cx6-W devices operate within a voltage supply range from 2.5 V to 5.5 V and the M93Cx6-R devices operate within a voltage supply range from 1.8 V to 5.5 V. All these devices operate with a clock frequency of 2 MHz (or less), over an ambient temperature range of - 40 ° C / + 85 ° C.
Part Number：M74HC132RM13TR
Manufacturer：STMicroelectronics
Category ：Integrated Circuits Logic - Gates and Inverters
Description ：IC GATE NAND SCHMIT 4CH 2IN 14SO
Detailed Description：NAND Gate IC 4 Channel Schmitt Trigger 14-SO
The M74HC132 is an high speed CMOS QUAD 2-INPUT SCHMITT NAND GATE fabricated with silicon gate C2MOS technology.
Pin configuration and function are identical to those of the M74HC00.
The hysteresis characteristics (around 20% Vcc) of all inputs allow slowly changing input signals to be transformed into sharply defined jitter-free output signals.
All inputs are equipped with protection circuits against static discharge and transient excess voltage.
Part Number：S25FL132K0XMFI011
Manufacturer：Cypress Semiconductor Corp / SPANSION
Category ：Integrated Circuits Memory
Description：IC FLASH 32MBIT SPI/QUAD 8SOIC
Detailed Description：FLASH - NOR Memory IC 32Mb (4M x 8) SPI - Quad I/O 108 MHz 8-SOIC
Many memory devices connect to their host system with separate parallel control, address, and data signals that require a large number of signal connections and larger package size. The large number of connections increase power consumption due to so many signals switching and the larger package increases cost.
The S25FL1-K reduces the number of signals for connection to the host system by serially transferring all control, address, and data information over 4 to 6 signals. This reduces the cost of the memory package, reduces signal switching power, and either reduces the host connection count or frees host connectors for use in providing other features.
The S25FL1-K uses the industry standard single bit Serial Peripheral Interface (SPI) and also supports commands for two bit (Dual) and four bit (Quad) wide serial transfers. This multiple width interface is called SPI Multi-I/O or SPI-MIO.
Part Number：LIS3LV02DLTR
Manufacturer：STMicroelectronics
Category ：Sensors, Transducers Motion Sensors - Accelerometers
Description：ACCELEROMETER 2-6G I2C/SPI 16LGA
Detailed Description：Accelerometer X, Y, Z Axis ±2g, 6g 10Hz ~ 640Hz 16-LGA (4.4x7.5)
The LIS3LV02DL is a three axes digital output linear accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and to provide the measured acceleration signals to the external world through an I2C/SPI serial interface.
The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce inertial sensors and actuators in silicon.
The IC interface instead is manufactured using a CMOS process that allows high level of integration to design a dedicated circuit which is factory trimmed to better match the sensing element characteristics.
The LIS3LV02DL has a user selectable full scale of ±2g, ±6g and it is capable of measuring acceleration over a bandwidth of 640 Hz for all axes. The device bandwidth may be selected accordingly to the application requirements.
The self-test capability allows the user to check the functioning of the device.
The device may be also configured to generate an inertial wake-up/free-fall interrupt signal when a programmable acceleration threshold is crossed at least in one of the three axes.
The LIS3LV02DL is available in plastic SMD package and it is specified over a temperature range extending from -40°C to +85°C.
The LIS3LV02DL belongs to a family of products
suitable for a variety of applications:
– Free-Fall detection
– Motion activated functions in portable terminals
– Antitheft systems and Inertial navigation
– Gaming and virtual reality input devices
– Vibration monitoring and compensation
We are good at hard to find & obsolete & new original active and Passive Components.Only sell components that have passed the inspection of the quality inspection department，Commitment to one year guarantee.Emial:[email protected].
